Fully sealed design, programmable, can be used on most machine tools such as automated production lines, flat surface machine tools, inclined surface machine tools, line rail machine tools, and CNC machines. The upper and lower arms have coolant and air interfaces, which can effectively clean iron filings. Low maintenance, long service life, and installation brackets (fixed and knife following) can be provided according to customer requirements.
Drainage and compressed air interface
G 1/8 "for sizes below 3.2 and G 1/4" for sizes above 4;
Cylinder clamping and loosening interface
G 1/4 "for sizes below 3.2 and G 3/8" for sizes above 4
*Retain technical changes
*For more detailed information, please request drawings
| AUTOLING Model size | SCR-0 | SCR-1 | SCR-2 | SCR-3 | SCR-3.1 | SCR-3.2 | SCR-4 | SCR-5 | SCR-5.1 | SCR-6 | SCR-7 | SCR-8 | |
| Minimum clamping straight | C1 | 4 | 6 | 8 | 12 | 20 | 50 | 30 | 45 | 85 | 120 | 180 | 230 |
| Maximum clamping straight | C2 | 45 | 65 | 102 | 152 | 165 | 200 | 245 | 310 | 350 | 460 | 545 | 630 |
| Maximum opening (excluding protective cover) | C3 | 46 | 66 | 104 | 157 | 182 | 210 | 248 | 318 | 360 | 462 | 550 | 642 |
| Maximum opening (including protective cover) | C4 | 46 | 66 | 104 | 162 | 169 | 204 | 243 | 318 | 358 | 462 | 548 | 636 |
| A | 170 | 200 | 279 | 427 | 440 | 456 | 603 | 695 | 747 | 945 | 1060 | 1240 | |
| B | 117 | 133 | 197 | 307 | 315 | 330 | 448 | 510 | 530 | 709 | 815 | 950 | |
| C | 52 | 67 | 82 | 120 | 125 | 125 | 155 | 185 | 217 | 235.5 | 245 | 290 | |
| D | 120 | 132 | 205 | 290 | 290 | 262 | 405 | 440 | 440 | 680 | 710 | 900 | |
| E | 105 | 118 | 170 | 262 | 262 | 130 | 365 | 400 | 400 | 610 | 650 | 810 | |
| F | 55 | 64 | 85 | 135 | 135 | 135 | 240 | 270 | 167 | 330 | 440 | 450 | |
| G | 46 | 55 | 70 | 95 | 93 | 93 | 105 | 143 | 143 | 148 | 162 | 190 | |
| O | 45 | 50.5 | 70 | 115 | 123 | 138 | 146 | 178 | 243 | 215 | 320 | 375 | |
| Arm thickness | K | 18 | 25 | 35 | 45 | 45 | 45 | 60 | 75 | 75 | 75 | 82 | 100 |
| Roller thickness | L | 7 | 12 | 19 | 25 | 25 | 25 | 25 | 29 | 29 | 29 | 32 | 32 |
| roller diameter | M | 17 | 19 | 35 | 47 | 47 | 47 | 52 | 62 | 62 | 80 | 100 | 100 |
| P | 58 | 69 | 102 | 130 | 130 | 130 | 150 | 160 | 165 | 210 | 240 | 240 | |
| P1 | 29 | 32.5 | 51 | 65 | 65 | 65 | 75 | 80 | 82.5 | 105 | 120 | 120 | |
| P2 | 29 | 36.5 | 51 | 65 | 65 | 65 | 75 | 80 | 82.5 | 105 | 120 | 120 | |
| Fixed bolt hole diameter | S | 9 | 11 | 14 | 18 | 20 | 20 | 23 | 23 | 23 | 27 | 27 | 35 |
| T | 48 | 53 | 68 | 93 | 95 | 95 | 105 | 143 | 145 | 150 | 162 | 188 | |
| V | 29 | 36.5 | 54 | 89 | 97 | 112 | 128 | 160 | 180 | 185 | 280 | 290 | |
| Piston area | cm² | 8 | 8 | 19.6 | 38.5 | 38.5 | 38.5 | 63.5 | 78.5 | 78.5 | 113 | 132 | 176.6 |
| Operating oil pressure min/max | bar | 6/40 | 8/40 | 8/40 | 8/45 | 8/45 | 8/45 | 8/50 | 8/50 | 8/50 | 8/50 | 10/50 | 10/50 |
| Maximum clamping force of the roller | dan | 110 | 168 | 459 | 1000 | 1000 | 1000 | 1500 | 2000 | 2000 | 3000 | 3500 | 4000 |
| Maximum circumferential linear speed of the roller | m/min | 900 | 850 | 800 | 725 | 725 | 725 | 715 | 700 | 700 | 685 | 570 | 570 |
| centering precision | mm | 0.02 | 0.02 | 0.02 | 0.04 | 0.04 | 0.04 | 0.05 | 0.06 | 0.06 | 0.06 | 0.07 | 0.08 |
| Repetitive positioning accuracy | mm | 0.005 | 0.005 | 0.005 | 0.007 | 0.007 | 0.007 | 0.007 | 0.01 | 0.01 | 0.01 | 0.02 | 0.03 |
| weight | kg | 5 | 7 | 17 | 39 | 45 | 48 | 98 | 150 | 150 | 400 | 1000 | 1300 |
*Non standard customization according to customer requirements*
